Silver Pulser Lite Ionic Silver Colloidal Generator

Silver Pulser Lite Ionic Silver Colloidal Generator - Our colloidal silver generator is specifically designed for high reliability and an un-heard-of low price. This silver colloidal generator is simply a low cost version of the silver pulser. At this low price, anyone around the globe can afford this remarkable technology. Special volume pricing for use in developing countries. Now, all of humankind can benefit from micro-currents of electricity colloidal silver generator. What makes the silver pulser lite different from the silver pulser? Simply put, the silver pulser lite cannot be repaired as it is a fully sealed unit.After this time, if the silver pulser lite requires repairs it must be discarded and a new one purchased. On the other hand, the silver pulser has more refined features, more accessories and of course has a full 3 year warranty.

Silver Pulser Lite Unique Features :

The Bio-Electric Protocol has changed. The output voltage rabges from 27 Volts to 31 Volts (from 54 Volts Peak-Peak, to 62 Volts Peak-Peak). A new intensity control was specified to help widen the band of the output control to avoid "bunching" the signal near the high end of the control knob.
A unique circuit design allows silver pulser lite to operate from a single 9 Volt alkaline battery. Our state-of-the-art electronic design utilizes a proprietary DC-DC converter which boosts the output of the 9 Volt battery to the 31 Volts DC required by silver pulser lite.
Constant-Voltage Output - Unique circuitry maintains the required 31 Volts output regardless of battery voltage or other input power (like from an AC-DC Wall Adaptor, Automobile Battery, or Solar Panel). Thus, as the battery runs down or if the input voltage fluctuates, the output will maintain the 31 Volts. No other unit using either 3 x 9 Volt batteries or voltage triplers can offer this very important feature.
We use only the purest, Fine Silver Wire Electrodes, 4 Nine Grade (.9999 pure) for the Ionic-Colloidal Silver production.
Constant-Current Output - Collodial silver generator has built-in Constant-Current Circuit for Ionic/Colloidal Silver production.
Output monitoring circuit and indicator.
The Bio-Stimulator Probes are of the highest quality copper.
6 Month Limited Parts and Labor Warranty on all internally mounted components. Replacement Fine Silver Wire Electrodes and Probes are available.

Silver Pulser Lite Model Features Include:

Silver colloidal generator streamlined unit
Constant-Voltage output for Bio-Stimulator
Constant-Current Circuit for the Ionic/Colloidal Silver Output
Flashing Green LED Light indicates when the current through the stimulator electrodes is correct and functioning
Orange LED Light indicates when the current through the Silver Wires is correct and functioning
Special DIN style jack to comply with new government regulations
Colloidal silver generator battery is partially exposed and snaps into the unit
Very rugged design: unit is completely encased in plastic
No repairs can be made to unit. If silver colloidal generator unit fails for any reason, it must be discarded and a new unit purchased
Minimal accessories, however unit comes will all necessary cords, electrodes, and parts for full operation.
Colloid silver generator has 6 months warranty

Silver Pulser Chart

Silver Pulser Lite Chart

Click here for close look of the Silver Pulser Lite

Each silver pulser lite is a professionally designed quality unit, thoroughly tested on an oscilloscope, and is guaranteed to operate per the specifications. The silver colloidal generator uses only the highest quality .9999 Pure Fine Silver Electrodes. The silver pulser lite generates the finest quality Ionic Colloidal Silver at a rate of 5-8 PPM (part per million) in 2 Hours for 16 ounces of distilled water, with an Ionic Colloid silver particle size that is mostly ions, with colloidal particles in the range of 0.005 - 0.015 microns (Verified on a Scanning Electron Microscope). The collodial silver generator unit has a built-in Constant-Current Circuit for the ultimate in Ionic/Colloidal Silver Production. Silver pulser lite has a Bi-Phasic output frequency of ~3.92 Hertz (cycles per second) at a nominal voltage of 31 VOLTS DC peak per cycle.

The silver pulser lite is a dual function unit 1) Bio-Stimulator and 2) Ionic/Colloidal Silver Generator with Constant-Current.

Differences between the SP Lite and the Silver Pulser:

Feature	Silver Pulser Lite	Silver Pulser
Warranty	6 months	3 years
Able to repair unit?	No	Yes
Constant-Voltage Output on Bio-Stimulator?	Yes	Yes
Constant-Current Output for Colloidal Silver Production?	Yes	Yes
Single 9 Volt Alkaline Battery Operation	Yes	Yes
Silver Wire Holder?	No (Alligator Clips are used). NOTE: A Silver Wire Holder can be purchased as an option.	Yes
Length of .9999 Pure Fine Silver Wires	4 Inches	8 Inches
Glass Dropper Bottle?	No	Yes
Arm Strap Holder?	No	Yes
Cotton Sleeves	2 Pair	3 Pair
Velcro / Neoprene Wrist Straps	1	2
Able to power with optional AC/DC Adaptor?	Yes	Yes
Low Battery Warning Light?	No	Yes
Soft Carrying Case?	No	Yes
Able to return used unit?	No	Yes
Price	$115 US	$225 US

Silver pulser lite is housed in sealed custom plastic enclosure with an external slot for the 9 Volt battery. A thumbwheel switch control knob turns silver pulser lite on and off and varies the intensity of the "Bio-Stimulator Probe" output.

LED Functions :

A Green LED Light comes on when the silver pulser lite is turned on.
A Flashing Green LED light on the unit indicates there is a correct Bio-Stimulator output and comes on only when current is flowing.
An Orange LED light is used for the Ionic-Colloidal Silver generation. The Orange LED Light comes on only when current through Silver Wires is correct and the circuit is complete.

The silver pulser lite has one 6 pin DIN style jack for plugging in the Fine Silver Wires and for the copper Bio-Stimulator Probes. A second jack is used for hooking up an AC-DC Wall Adaptor so you don't have to go through batteries. NOTE: You cannot power the unit with a wall Adaptor at the same time as using the Bio-Stimulator output. This is a government regulatory stipulation. However, a wall Adaptor can be used for Silver production only.

We include cotton sleeves to put over the Bio-Stimulator Probes for helping to maintain a good connection when moistened. (Hint: Use a Salt Water solution or a conductive gel for better conductivity!)

Each Silver Pulser comes complete with:

The silver pulser lite unit
Operating Instructions
Two (2) .9999 (4 Nine Grade) Pure Fine Silver Wire Electrodes (4 inches long) NOTE: A Silver Wire Holder can be purchased as an option.
One (1) Silver Wire Alligator Cord
One (1) High Grade Copper Bio-Stimulator Probes
One (1) Velcro®/Neoprene® Strap
One (1) Scotchbrite® scrubber pad
Four (4) Cotton Probe Sleeves
One (1) 9 Volt Alkaline Battery
CE Certification
6 Months Limited Parts and Labor Warranty on internally mounted components

Electronics:

Silver pulser lite is designed to the highest standards. Our electronic design is unique and efficient making the unit very portable and light-weight. There's even a provision for adding an external power source to save on batteries when making Ionic/Colloidal Silver, such as an AC-DC Wall Adaptor which you can purchase from any electronic store.

Silver Colloidal Generator Specifications:

Silver Pulser Battery Voltage: 9 Volts DC (Alkaline Battery)
Optional Input Voltage: 6 - 12 Volts DC @500mA Wall Transformer/Adaptor, Automobile Battery, or Solar Panel.
Output Voltage at Colloidal Silver Wires: 31 Volts DC, (+/- 1 Volt) Constant-Voltage Output
Output Current at Colloidal Silver Wires: 1.5 milliamps (+/- 0.5ma) Constant-Current Output
Ionic-Colloidal Silver Production: 5 - 8ppm (parts per million) for 2 hours for 16 ounces distilled water.
Ionic-Colloid Silver Particle Size: Mostly ionic, with colloidal particles in the range of 0.005 - 0.015 microns when made as directed.
Ionic-Colloid Silver Colour: Clear or Pale Gold.
Silver Wire Life: Can make many gallons ionic/colloidal silver per set of Fine Silver Wires, when made as directed.
Output Voltage at Copper Stimulator Probes: 31 Volts (Peak per Cycle, 62 Volts Peak-Peak) Bi-Phasic at ~3.92 Hertz (cycles per second) +/- 1 Hz. To see the actual output waveform from the oscilloscope, please click HERE. Note the extremely square and symmetrical waveform; free of any spikes or artifacts.
Output Current at Copper Stimulator Probes: ~12 milliamps maximum when probes shorted and Control Knob on full intensity.
The Fine Silver Wires are 14 AWG (1.63mm or 0.064" dia.) x 4" long (1.5 mm diameter x 10 cm long) and are constructed of only Pure Fine (.9999 pure) Silver Wire.
Bio-Stimulator Probes are 1/8" diameter x 1.25" long (3mm diameter x 3.8 cm long) and are constructed of heavy copper.
Weight of The SP Lite unit is only a few ounces - very lightweight.

International Voltage (220 or 240 Volt Mains) Requirements:

The silver pulser lite can be operated by an external power source like an AC-DC Wall Adaptor, Automobile Battery, or Solar Panel. If you wish to power the silver pulser lite with a wall transformer, your options are:

Purchase International & Universal Wall Adaptor.
Purchase a local Wall Adaptor with: Input 220VAC or 240VAC, 50 Hz Mains, 6-12 Volt DC output, 500mA (milli-amps) or more, Centre Positive, 2.1mm Plug.
Additionally, the silver colloidal generator may also be operated directly from a 12 Volt DC Battery like an automobile cigarette lighter. You will need to purchase an Adaptor cord which plugs into the cigarette lighter and has a Centre Positive, 2.1mm Plug. Radio Shack® usually has these Adaptors.

Options for Powering the Silver Pulser Lite

In the event of a power outage here are some options for powering the SP Lite other than normally with its 9-Volt DC Alkaline Battery:

The silver pulser lite may be operated directly from a 12 Volt DC Battery like from an automobile cigarette lighter. You will need to purchase an Adaptor cord which plugs into the cigarette lighter and has a Centre Positive, 2.1mm Plug, like from Radio Shack®.
The silver pulser lite can be powered by a suitable Solar Panel. Keep in mind that most solar panel generators are used to re-charge a battery which in turn operates the unit. Therefore we suggest you use a solar panel to re-charge a 12 Volt DC automobile battery (preferably a sealed Gel-Cel® type), then run the silver pulser lite directly from the battery. You will need to use a cord which has alligator clips on one end to attach to the battery terminals, and the appropriate Centre Positive, 2.1mm Plug on the other end to plug into the silver colloidal generator. Be careful with polarity! Centre-Positive! This type of cord with alligator clips on one end is probably not readily available, therefore you will to need to buy a cord and cut off the end that normally goes into the cigarette lighter, and solder your own set of alligator clips. Use a black and red alligator clips so you ensure polarity is correct each time you connect the circuit.
If you wish to operate the silver pulser lite directly from a solar panel you will need to use a 12 Volt DC rated output panel that is capable of supplying at least 1 Amp of current. The silver colloidal generatorinitial starting demands may require a higher output solar panel. That is why it is preferable to use a charged 12 Volt DC battery instead.

Silver Pulser Lite Ionic Silver Colloidal Generator

Indications

Experimental Electronic Research Instrument.

Product Shipping Note: (Please Read Carefully)

Please be aware that it may take 7- to 10 days to receive this product.
Please also feel free to make an inquiry regarding shipping times by emailing or phoning Healio Health at any time; prior to purchase.