EMF Detector Pacemaker Health Alert Device

EMF Detector Pacemaker Health Alert Device is the first that detects AC electrical, high frequency, and AC magnetic fields and alarms when the field strength is beyond the safety threshold. When pacemakers are installed, most doctors warn patients to stay away from electric, magnetic field (EMF), and high frequency (RF) sources. However, EMF and RF are invisible and today’s life is full of electrical appliances. EMF detector health alert electrosensor device helps in this bothersome matter for the pacemaker patients when to avoid these harmful electrical interference in their day-to-day life.

The threshold was set up for these electrosensor device based on pacemaker manufacturer’s specifications and left enough safety margin to give early warning before the sources actually start interfering the pacemakers. The health alert electromagnetic field detector has four light-emitting diodes (LEDs) to indicate the status of the unit. The lit green LED of the emf detector shows the battery is on. The three red LEDs of the EMF Detector represents alarms for electrical (E), high frequency (RF), and magnetic (M) fields respectively, and will be on individually or jointly when one or more sources are stronger than the thresholds. The health alert device is very easy to use, and does not require a technical background.

Features

EMF detector health care device has one year warranty.
After first year, annual calibration service is provided. One could purchase life time calibration service, or ask for the calibration done year by year.
Emf meter size is 2.25"x5.25"x1".
Weight: 5 oz.
Made in USA.

Power consumption and battery

Please pay attention to the polarity of the battery when installing the pacemaker emf meter device. Alkaline 9V battery will last more than 20 hours of continuous use, but a rechargeable battery will only last about 9 hours. It is strongly suggested that one should take an extra battery when on a trip for safety purposes.

Specifications For EMF and RF

For AC Electrical fields, alarm threshold is 4 KV/m., calibrated at 60 Hz. Frequency range is from 30 Hz to 5 KHz.
For RF, 500 KHz to 5.5 GHz, alarm threshold is 100 V/m (2.65 mW/cm2), calibrated at 2.45 GHz.
For Magnetic fields, alarm threshold is 1.5 Gauss, calibrated at 60 Hz. Frequency range is from 30 Hz to 5 KHz.
EMF detector pacemaker health alert device is powered by a 9V battery. Current drain is about 30mA without alarm.

Strong EMF Sources

Strong EMF sources in our environment highly depend on what you do, where you go, and how you live. One may encounter many sources; electrical equipment, On the door seal of microwave ovens, from the AC/DC adaptor used for the answering machine, CD player, or other small appliances. When you run the health alert device test once the alarm goes off, and one can know the whether the emf detector unit is working and then walk away from it. We do not recommend you stay near the source for a long period of time.

EMF Detector Pacemaker Health Alert Device

EMF Detector Pacemaker Health Alert Device

User Instructions

Slide the button of the emf meter at the right side up to turn the health alert device on. The green LED should be on. If no light is on, check the battery.
Use the pacemaker emf detector health alert unit to test all the electrical devices in your environment to make sure you are safe at your home and in your office. Leave the emf detector unit on when you go to new places.
Turn the switch off of electrosensor the after use. This will prolong the battery life.

Indications

EMF detector, Pacemaker alert.